REPRESENTASI SIMBOLIK FENOMENA ALAM DALAM KARYA SENI PATUNGLANDMARK ’KESEIMBANGAN’

Authors

  • Amir Gozali Jurusan Seni Rupa Murni Fakultas Seni Rupa dan Desain ISI Surakarta
  • Effy Indratmo Jurusan Seni Rupa Murni Fakultas Seni Rupa dan Desain ISI Surakarta

DOI:

https://doi.org/10.33153/abdiseni.v7i1.1829

Abstract

Karya patung landmark sebagai suatu bentuk karya seni bangun, dengan segala fungsi serta misinya, yang
diwujudkan secara kongkrit (visualized) melalui suatu upaya rekayasa simbolis agar dapat tercipta dialog
atau komunikasi dengan khalayak luas atau publik. Penelitian penciptaan karya ini menggunakan metode
eksperimentasi, dengan melakukan percobaan-percobaan yang mengedepankan perencanaan mulai dari
perancangan, persiapan dan perwujudan karya dalam media. Metode ini diterapkan, dengan melihat sifat
data penelitian penciptaan karya yang pada prosesnya akan dilakukan dengan pembuatan modeling dengan
medium kayu, sedangkan aplikasinya dengan tehnik plester yang akan difnishing dengan ekpsperimen
warna seperti warna logam (coklat-merah). Sebagai sebuah karya seni rupa khalayak (public art), patung
landmark dibuat berdasarkan sejumlah prasyarat, kaidah serta prinsip-prinsip yang mendasari, sehingga
sesuai dengan maksud dan tujuan dibangunnya sebuah patung publik.Secara visual dan intensitas proses
penggarapan, terkait kerumitan dan kecermatan dari teknik pembangunan seni patung publik, dimunculkan
juga dalam penelitian ini yaitu melalui kekuatan konstruksi, ergonomi keruangan sehingga mampu menjadi
penanda identitas bagi kawasan yang akan di gunakan sebagai letak karya patung tersebut yaitu di Kawasan
Kampus 2 FSRD ISI Surakarta.
Kata kunci: Representasi, Simbolik, Fenomena Alam, Patung Landmark.

Downloads

Download data is not yet available.

Downloads

Published

2017-05-24

Issue

Vol. 7 No. 1 (2016)

Section

Articles

License

License and Copyright Agreement

In submitting the manuscript to the journal, the authors certify that:

  • Their co-authors authorize them to enter into these arrangements.
  • The work described has not been formally published before, except as an abstract or part of a published lecture, review, thesis, or overlay journal. Please also carefully read Abdi Seni's Posting Your Article Policy at https://jurnal.isi-ska.ac.id/index.php/abdiseni/about/editorialPolicies#peerReviewProcess
  • That it is not under consideration for publication elsewhere,
  • That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
  • They secure the right to reproduce any material already published or copyrighted elsewhere.
  • They agree to the following license and copyright agreement.

Copyright

Authors who publish with Abdi Seni agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges and earlier and greater citation of published work.

Licensing for Data Publication

Abdi Seni uses a variety of waivers and licenses that are specifically designed for and appropriate for the treatment of data:

Other data publishing licenses may be allowed as exceptions (subject to approval by the editor on a case-by-case basis). They should be justified with a written statement from the author, which will be published with the article.

Open Data and Software Publishing and Sharing

The journal strives to maximize the replicability of the research published in it. Authors are thus required to share all data, code, or protocols underlying the research reported in their articles. Exceptions are permitted but must be justified in a written public statement accompanying the article.

Datasets and software should be deposited and permanently archived in inappropriate, trusted, general, or domain-specific repositories (please consult http://service.re3data.org and/or software repositories such as GitHub, GitLab, Bioinformatics.org, or equivalent). The associated persistent identifiers (e.g., DOI or others) of the dataset(s) must be included in the article's data or software resources section. Reference(s) to datasets and software should also be included in the article's reference list with DOIs (where available). Where no domain-specific data repository exists, authors should deposit their datasets in a general repository such as ZENODO, Dryad, Dataverse, or others.

Small data may also be published as data files or packages supplementary to a research article. However, the authors should prefer a deposition in data repositories in all cases.